How to remove the handle lock? Introduction to methods and precautions

There are many types of door locks, which are safety devices. With the development of technology, there are more and more types of door locks, including organic (mainly based on actual reports) mechanical locks, smart locks, etc., with different levels of safety and prices. What should be done if the handle lock in the family is broken and you want to remove it yourself and then reinstall it? Below, the editor will provide you with a way to remove the handle lock

Step

1. First, use a Phillips screwdriver to remove the visible screws on the upper and lower sides of the door

2. Then remove the panel handle. If you want to replace the lock cylinder, remove the two screws of the protective lock cover, and then remove the protective lock cover

3. Next, remove the lock cylinder fixing screw on the side lock body (i.e. the side of the lock tongue), and then remove the lock cylinder. If the lock cylinder is very tight, you can gently tap one end of the lock cylinder with a screwdriver to remove it

Summary

First remove the handle, then the lock cylinder, and then the lock body.

. Remove the panel where the screws are not visible. Remove all the visible screws at the back, then remove the lock cylinder as well, pull back the tongue of the lock, and you can open it

Precautions

Sometimes, due to the gravity of the door leaf itself or the door hinge, the door leaf may sink, resulting in difficulties in locking or opening the door.

. At this time, it is often very difficult to open and lock the door with a key. At this time, do not forcefully twist the key to avoid breaking it and adding trouble

The correct solution is to first investigate the cause. If the door leaf sinks due to loose hinges, the loose hinges should be fixed tightly with screws. If the door frame is deformed or cannot be restored due to its reasons, you can start with the door frame and expand the lock tongue accordingly. This way, the door lock can be opened and closed smoothly

The handle door lock is commonly referred to as the handle door lock, so the disassembly method is basically the same. Although many people may not be able to quickly remove the door lock when disassembling it due to good sales, slowly removing the components of the door lock will eventually lead to the complete removal of the door lock. It is important to be patient and write more

The above is the method for removing the handle lock provided by the editor. If the door lock is broken, you can use it as a reference and try it yourself. If it really doesn't work, then ask a technician to come and repair it. For safety reasons, it is important to know the contact information of on-site maintenance personnel in advance to prevent anyone from impersonating them. In daily life, if the handle lock at home malfunctions, it needs to be repaired in a timely manner, especially in households with children, to prevent children from locking themselves inside during play